How to Prevent Springback in Precision Sheet Metal Bending

 When we bend metal, we have to prevent something called springback. Springback is when the metal wants to return to its old formation after we bend it. This can make it difficult to produce things that must be exactly right. We're discussing some techniques to stop springback in your metal bending process.

​

What is Springback in Metal Bending:

When Metal Into A New Shape it tends to spring back because of a force known as elasticity.  That's the cause of springback. To prevent springback, we need to know how much the metal will bend back and adjust how we bend it.

Choosing the Right Tools:

Selecting the proper tools for bending metal is also a critical consideration. The sheet metal fabrication have to be strong enough to bend the metal, but not so strong that they cause a lot of springback. We've got the highest quality tools and we can bend the metal straight.

Using Special Techniques:

There are some special techniques to reduce springback. One of these is referred to as  squooover-bending.  That entails overbending the metal a little so the spring-back places it against the proper angle. Another solution is to bend the metal more accurately using a tool called a press brake.

Selecting the Right Metal:

The kind of metal we’re using can also affect how much springback occurs. Some sheet metal laser cutting will spring back more than others. At Starway, we select the right materials for the job to minimize the risk of springback. It's not an ideal solution, but by choosing the right metal, we ensure our parts come out the way we want them.

Observation and Control of Bending Behaviour:

Even among good tools and practices, it is crucial to keep checking and adjusting the manner in which we are bending the metal. At Starway, we are very sensitive to how the metal behaves and will adjust as necessary. This allows us to assure accuracy and no springback of our metal parts.

In conclusion, the prevention of springback in sheet metal products is a matter of understanding how the bending process proceeds, selecting the proper tools, employing special techniques, selecting appropriate metals, and keeping an eye on things. By checking these boxes, we can ensure that our metal parts are just right and don’t have any undesirable springback.